A healthier home
How do you build a home with healthy indoor air?

A home in Tennessee has healthy indoor air when its finishes give off no fumes and its walls are built of layers that let water dry out in the local climate before mold can grow. Its bathroom dries fast after every shower, and there is a planned way for fresh air to come in, through open windows and fans that blow outdoors.

Paint, glue, pressed-wood boards and furnishings can give off chemicals into a home's air
Paints, glues, pressed-wood boards and furnishings are among the things in a house that give off chemicals into its air (US EPA, VOCs). Americans spend about 90 percent of their time indoors, on average, in homes and other buildings (US EPA), so most of the air a family breathes is indoor air.
The chemicals that paints and glues give off include volatile organic compounds, or VOCs, which the EPA describes as gases given off by certain solids or liquids. Its list of where they come from includes paints and solvents, wood preservatives, glues and adhesives, and building materials and furnishings (US EPA, VOCs).
Formaldehyde, a strong-smelling gas, is another. One source of it in a home is pressed-wood boards, made of wood pieces or fibers glued together, when the glue is made with formaldehyde. Medium density fiberboard (MDF) has more glue for the amount of wood than any other pressed-wood board, and the EPA says it is generally recognized as the one that gives off the most formaldehyde (US EPA, formaldehyde).
EPA studies finished in 1985 found about a dozen common chemicals at levels 2 to 5 times higher inside American homes than outside, whether the homes were in the country or in highly industrial areas (US EPA, VOCs). The EPA lists eye, nose and throat irritation and headaches among the health effects of VOCs, and it also says that not much is known about the effects of the levels usually found in homes.
What the paints, glues, pressed-wood boards and furnishings in a house give off goes into the air your family breathes.
Leave out the materials that give off fumes

The most effective way to improve the air in a house is usually to leave out the sources of pollution or cut what they give off, the EPA says (US EPA, Improving Indoor Air Quality). VOCs are gases, and the EPA adds that air cleaners are generally not designed to remove gases, so a cleaner can't be counted on to take them out once a material is giving them off. We choose the materials so that nothing in the finishes, or in the wall layers behind them, gives off fumes into the air the family breathes. Most of the families who call us want to keep plastics and synthetics out of the house, and they ask for natural building materials.
Our design for the Wild Cabin, a 370-square-foot cabin, uses the wood and stone those families ask for: an oak floor, a window framed in cypress, a soapstone hearth, and stone panels two inches thick behind the wood stove.
Most air cleaners aren't built to take out gases, so the way to keep fumes out of a home's air is usually to leave out the materials that give them off.
Walls need a way to dry out, and the way depends on the climate

One client worried about "living in a plastic bag with materials that will never stop off gassing," a house sealed so tight that the chemicals its materials give off stay inside with the family. Leaving out those materials answers the part of that worry about off-gassing. The part about a sealed house is the common question of whether a house needs to breathe. A house sealed tight can trap damp as well as fumes, so what it needs is walls that can dry when water gets in, and fresh air brought in on purpose for the people inside.
Apart from leaks, heavy rain and floods, most moisture gets into a building in the air, the World Health Organization says, either air that leaks in through the walls and roof or damp from what people do inside (WHO, Dampness and Mould).
A vapor barrier is a sheet or coating that all but stops water vapor from passing through a wall. Vapor barriers were meant to keep walls from getting wet, but they often keep walls from drying, writes Joseph Lstiburek, a building scientist (Building Science Corporation). He says different climates need different approaches, and that a wall shouldn't have a vapor barrier on both sides, so it can dry in at least one direction.
We choose a house's wall assemblies, the layers of a wall from the siding outside to the finish inside, for the climate the house stands in, so moisture that gets into a wall can dry back out before it feeds mold.
A wall needs a way to dry, so we choose its layers for the climate the house stands in.
Mold grows where things stay damp, so keep indoor humidity under 60 percent

The World Health Organization's 2009 guidelines name water on or in materials as the most important trigger for mold and bacteria to grow. The guidelines drew on studies from many countries and climates, in homes and public buildings both. People in damp or moldy buildings, they found, are at higher risk of breathing symptoms, infections of the airways and lungs, and asthma getting worse (WHO, Dampness and Mould).
"I don't want mold to be an issue where we live," one client told us.
Controlling moisture, the WHO guidelines add, means keeping the air from getting too humid, so water doesn't settle as drops on cool surfaces or soak into materials (WHO, Dampness and Mould). The EPA's guide to mold says that controlling moisture is the way to control mold, and to keep indoor humidity below 60 percent if possible, ideally between 30 and 50 percent (US EPA, mold guide). Relative humidity, the measure it uses, is the water vapor in the air as a share of the most the air could take at its temperature.
We design for dry, well-aired rooms, because damp and mold are a known health risk.
The driest bathroom is outdoors, and one indoors needs surfaces that shed water and a fan

Each shower wets the walls and fills the air with steam, and the EPA says to run the bathroom fan or open the window when showering (US EPA, mold guide).
As I see it, the best answer is to take the shower outside. A shower in an outdoor bathroom puts its steam into the open air, so none of it stays in the house. Why I'd put one beside the bedrooms is in Why should you go outside first thing in the morning?.
For a bathroom indoors, we drew the whole bathroom of the Wild Cabin as a wet room, where every surface, floor and walls, sheds water and can be hosed down. It has these parts:
- A continuous waterproof sheet, called a membrane, lines the floor, the walls and the corners at the ceiling, and is sealed into a linear drain, a long, narrow drain the floor slopes toward.
- Two porcelain slabs, each 9 by 4 feet, cover the shower walls. With so few joints there is almost no grout, the filler between tiles, for mold spores to settle in, and cleaning takes a quick pass with a squeegee.
- A frameless glass door takes the place of a shower curtain, so there's no curtain to stay damp and to clean.
- A fan with a humidity sensor switches on at 60 percent relative humidity and runs until it falls to 45 percent, long after you've dried off.
An outdoor shower keeps a shower's steam out of the house, and indoors, large slabs leave almost no grout for mold and a fan on a humidity sensor runs until the air is dry.
Plan how fresh air comes in, because most heating and cooling systems don't bring it

Outdoor air coming into a house thins out the fumes inside it, and most home heating and cooling systems "do not mechanically bring fresh air into the house," the EPA says (US EPA, Improving Indoor Air Quality). Among the ways it names to let outdoor air in are opening windows and doors and running window or attic fans, when the weather permits. Bathroom and kitchen fans that blow outdoors take fumes and damp air straight out of the room they're in.
The World Health Organization adds that fresh air should be spread through the rooms, with no places where the air stands still (WHO, Dampness and Mould).
In a ranch house we designed, the rooms are set around a central courtyard, so when the windows are open, breezes get pulled through the rooms and pass from one side of the house to the other. Air coming in one side of a room and going out the other is called cross ventilation.
Plan the rooms so a breeze can pass through them, and spread fresh air through the whole house so no corner is left with air standing still.
Houseplants take too little from the air to clean it, so keep them for how a room looks and feels

Potted plants take so little out of a room's air that they don't count as a way to clean it. A 2020 review pulled together 196 results from 12 published studies, all lab tests of plants in sealed chambers. To remove VOCs as fast as the outdoor air coming into a typical building already does, it worked out, a room would need 10 to 1,000 potted plants for every square meter (about 11 square feet) of floor (Cummings and Waring, 2020).
We still bring plants in for how a room looks and feels. Under the Wild Cabin's stair, our design puts a built-in planter, where the leaves break up the straight edges of the wooden stair and echo the bamboo screens outside.
A room would need 10 to 1,000 potted plants per square meter to clean its air as fast as outdoor air coming in does, so we keep plants for how a room looks and feels.
Sources
- US EPA, Report on the Environment: Indoor Air Quality
- US EPA, Volatile Organic Compounds' Impact on Indoor Air Quality
- US EPA, What Should I Know About Formaldehyde and Indoor Air Quality?
- US EPA, Improving Indoor Air Quality
- US EPA, A Brief Guide to Mold, Moisture and Your Home
- WHO Regional Office for Europe, WHO Guidelines for Indoor Air Quality: Dampness and Mould, 2009 (full PDF)
- Joseph Lstiburek, "BSD-106: Understanding Vapor Barriers", Building Science Corporation
- Cummings and Waring, "Potted plants do not improve indoor air quality: a review and analysis of reported VOC removal efficiencies", Journal of Exposure Science & Environmental Epidemiology 2020
Let’s talk